Audi delivers a perfect combination of performance and comfort in the RS7. The 4.0 Liter V8 produces 560 horsepower with a 0-62 mph mark at 3.9 seconds. Driving the car, it feels incredibly powerful. And the exhaust note under throttle is perfect. However the car does not feel overly large or cumbersome. Driving this car full out on the Denver roads unprotected will absolutely incur rock chips and road debris damage. Wearing the Florett Silver Matte paint option, any touch up repair would be next to impossible to match perfectly. We need to make sure this paint is well protected!

In standard Denver Auto Shield fashion we have gone with a combination of Clear Bra (Paint Protection Film) and Quartz Coatings to keep the surfaces well protected, looking great, and very easy to maintain. Follow along below for the full process!

Each project starts with an intense and thorough cleaning of each surface of the vehicle. We must ensure that no debris migrates in to the installation area and that the paint is perfectly clean and contaminant free before any film is applied.

While the vehicle is being cleaned, we are also preparing the Clear Bra for installation. We utilize the XPEL DAP Design Software and our full sized Graphtec Plotter to custom design the coverage and pre cut it using the software, so that no hand trimming of film is done over the paint’s surface with a razor. We can manipulate the patterns to extend any edges, delete side markers, add sections, add curves, and anything else we want to do to create a very uniform and clean installation.

Once the car is completely clean and the Clear Bra prepared we can begin installation. On this RS7 we protected the Front Bumper, Full Hood, Full Fenders, Headlamps and Fog Lamps, Full Roof, all 4 Doors, and Rocker Panels in our Matte Finish Paint Protection Film to match the factory Matte Paint.

Once the Clear Bra is installed, me move on to the Quartz Coating. We are using a Matte specific coating from GYEON quartz that will deliver long term protection and easy maintenance without adding any unwanted gloss to the finish. We first Prep the surface to ensure a perfectly clean bond of the Quartz Coating.

Now time to install the Quartz Coating!

Once the coating is installed we have a car that is well protected from rock chips and road debris with it’s Clear Bra and will resist UV and chemical damage while being very easy to clean and maintain with the Quartz Coating. Check out the final shots!

This car can now be driven worry free and fully enjoyed! To discuss your Paint Protection needs contact us today!

 

 

FREE QUOTE