BMW M3 G80 receives the Ultimate Protection Package: XPEL Window Tint, XPEL Clear Bra, and GYEON Ceramic Coatings

The legendary BMW M3 platform has finally reached its latest generation, the G80. With its redesigned grille, an all-new M XDrive System, and a blistering 3.4 second 0-60, we were beyond excited to protect this stunning example finished in Toronto Red Metallic over a Silverstone leather interior. It will be receiving XPEL Ceramic Window Tint, Full-Body Clear Bra coverage, and GYEON Ceramic Coatings.

Before we get started on any kind of protection, it’s crucial that we deep clean and completely decontaminate all surfaces on the vehicle. The decontamination wash will always begin with a liberal application of GYEON Q²M Iron and Q²M Foam to remove those below-surface contaminants including but not limited to rail dust, brake dust, and metal filaments from transport.

From here, we’ll use the three-bucket method and GYEON Q²M Bathe to safely clean both the paint and the wheels. We also clay bar the entire vehicle to further remove any above-surface contaminants and exfoliate the paint. To finish up our wash process we’ll dry the car with a BLO Car Dryer to avoid re-introducing any foreign matter back onto the paint.

Now that we have a completely clean and decontaminated vehicle, we’ll begin installing XPEL Paint Protection Film. This M3 is receiving our most complete protection package: Full-Body Coverage. This will ensure that the owner never has to worry about rock chips, bugs, or bird droppings on the paint. As mentioned above, this is our most complete protection package, guaranteeing a complete worry-free driving experience no matter the road conditions.

To make sure that a blade never comes anywhere near your brand-new paint, we utilize the XPEL DAP Design Software to custom design clear bra coverage for any vehicle. Within the DAP, we can customize the pattern for each body panel to guarantee a seamless installation before we even touch the vehicle. Because we have complete control over the patterns, the film will never be stretched or distorted nor will there be any inconsistencies in cutouts for sensors or cameras. At this point, we will also remove any badges that could interfere with a seamless installation.

Once all the clear bra is printed, we can begin the installation. XPEL Installation Gel is sprayed onto the body panel then the film is laid down. We use a squeegee to push the gel out from underneath the film and adhere the PPF to the surface of the vehicle.

Now that the clear bra is installed, this M3 will sit overnight to allow the installation gel to dry and allow the film to set. The next morning, we spent some quality time with the vehicle, making sure that all the edges are wrapped and there are no air pockets.

For superior heat rejection, improved looks, and reduced UV damage, this M3 is receiving our Sides and Rear Tint Package. Before we start tinting the windows, we’ll use the same XPEL DAP Software to design and print the tint for each of the windows. Using a heat gun, we place the printed tint on the outside of the window to shrink the film to the size of the window. Then we’ll use a squeegee to clean the inside of the window to ensure a clean surface to apply the tint.

This M3 is now tinted and protected top to bottom in PPF, so it’s time to apply a ceramic coating. We use GYEON Q²M WaterSpot to remove any remnants of the clear bra installation gel and follow that up with Q²M Prep, an alcohol-based solution, to get rid of any grease or lubricants left behind on the film.

We’ll be coating this M3 with our Level 2 Ceramic Coating package which includes GYEON Q²Infinite Base Type 1 as the first coat and GYEON Q² Infinite EVO TopCoat Type 1. This is an exceptional coating package that provides complete chemical and UV protection, intense water behavior, and easy cleaning. Even the wheel faces and windshield will get coated in Q² Rim and Q²View respectively, ensuring total protection and ease of cleaning.