As the newest iteration of the flagship Ferrari Hypercar, the Ferrari F80 is a more than worthy successor to the F40, F50, Enzo and most recently the LaFerrari. Using technology derived directly from Formula One and endurance racing, the F80 achieves unprecedented performance among the Ferrari lineup.
We were lucky enough to get the chance to finish this Bianco Italia Ferrari F80 with the protection it deserves: Full Body GYEON Paint Protection Film.
Step 1: Decontamination Wash
A gentle yet thorough decontamination wash is standard procedure for every vehicle that comes through our studio and this F80 is no different. This wash can have an enormous impact on the quality of a PPF installation, so we are careful to take our time throughout the wash to set ourselves up for success.
For our first step, we always start by cleaning the wheels so that we don't cross-contaminate the body of the vehicle with brake dust or grime from the surface of the wheels. Using a bucket dedicated for only wheels, a safe an effective wheel cleaner and a variety of specialized wheel brushes, we’ll completely clean each wheel, including intricate areas such as lug-bolt holes and weight relief slots on these carbon fiber wheels.
Once the wheels are completely clean, we can shift our focus to the paint. Our primary goal here is to get all painted surfaces perfectly clean and decontaminated. To get started, we’ll soak the entire car in
GYEON Q2M Foam and let it rest on the paint while we fill our buckets we’ll use for the contact wash. The purpose of letting the foam rest on the car is to allow the product to break down and soften any surface contamination, reducing the risk of scratching or marring the paint with the wash mitt.
With the foam rinsed off, we’ll start our contact wash using the two-bucket system,
GYEON Q2M Bathe and a
GYEON Smoothie wash mitt. Moving one panel at a time, and carefully rinsing our mitt between panels, we’ll work our way around the entire car before rinsing it off and getting ready for decontamination.
For the decontamination step, we’ll be using
GYEON Q2M Iron and
Clay Lube in conjunction with a clay bar. This combination is highly effective at removing any surface contamination, no matter how severe. GYEON Iron completely breaks down any remaining surface contamination, while the clay bar removes stubborn, embedded contamination.
With fully clean and decontaminated paint, we’ll use a
BLO car dryer to dry the entire vehicle before it will move into our PPF installation bay.
Step 2: Paint Protection Film
The owner of this Ferrari F80 chose to protect their new hypercar with Full-Body GYEON Paint Protection Film. This is the most comprehensive PPF package that we offer and covers all painted, gloss black, or carbon fiber exterior panels in durable and robust Paint Protection Film.
PPF is an optically clear polyurethane film designed to act as a sacrificial layer for your paint. It protects your vehicle from rock chips, scratching, swirling and chemical etching. It’s extremely durable and carries a manufacturer warranty for 10 years, so that you can drive with peace of mind for the life of your vehicle.
Before we start installing film on the car, we’ll start on the computer using a GYEON Cut and a GraphTec plotter to print specialized PPF patterns designed specifically for this F80. Especially on a car this complex, designing and printing patterns allows us to deliver more complete PPF coverage.
With all of the film for the vehicle printed, we can begin installing on the vehicle. First, we’ll saturate the panel with a slip solution and lay the piece of film on after. This allows the film to ‘float’ on top of the paint so that our factory trained installers can align the PPF on the panel. With the PPF properly aligned, our installers will set anchor points before using the squeegee to push the slip solution out from underneath the film and allowing the PPF’s adhesive to bond to the paint.
Using the same method, we’ll work our way around the vehicle until it’s completely covered in PPF. After we finish installing, we’ll let the vehicle sit overnight to allow any moisture to dry and reveal any touch-ups or unwrapped edges. The next morning, we’ll work our way around each panel, fixing anything we missed during the installation process. We always strive to deliver a perfect install every time, and this additional trimming time allows us to do that.
Step 3: Delivery
With another perfect PPF installation on the books, we’ll detail the interior on this very very special vehicle and let the client know that their new hypercar is ready to be picked up.
























